Cleaners, Problem Solvers & Stone Restoration

AQUA MIX® NanoScrub®
An abrasive cream cleaner designed to work where other cleaners won’t. It utilizes nano-sized particles to penetrate into small surface pores where it can effectively work to remove surface stains and residues. Effective for cleaning all stone and tile surfaces. Also removes factory applied waxes and floor finishes, coating sealers, light grout residue (including epoxy), rubber and pencil marks, light mineral deposits, ground-in dirt and most sealer residues.
NanoScrub® is non-toxic, non-flammable and non-acidic.

AQUA MIX® Sealer & Coating Remover
A nonflammable, multipurpose stripper formulated to stay wet longer which gives the product time to remove most sealers, epoxy grout haze, urethane coatings, synthetic finishes, adhesives and paints. Also dissolves deep-set stains and removes heavy grease build up.
Sealer and Coating remover will also soften polymeric sand for easier cleaning.

AQUA MIX® Eff-EX®
Limitations
- Do not allow product to come in contact with any non-recommended surface.
- Not recommended for use on polished marble, limestone, and travertine surfaces
- If efflorescence appears after surface is sealed, Eff-Ex® will remove the efflorescence but its ability to inhibit efflorescence is reduced

AQUA MIX® Ex-Treme®
Limitations
- Do not use on polished, acid-sensitive stone (such as marble and limestone).
- Do not allow product to come in contact with any non-recommended surface.
- Do not mix with ammoniated cleaners, such as bleach, as harmful fumes will result
- Acids of all kinds may etch, lighten, or change the color of cementitious material, metallic glazes and some natural stones such as marble and limestone
A nonflammable, heavy-viscosity acidic cleaner designed to remove years of accumulated discoloration from air pollution or carbon buildup, stains from smoke, soot, red soil and rust. It is a safer alternative to traditional harsh acids.

AQUA MIX® AquaShield™ Cleaner & Resealer
This ready-to-use cleaner & resealer is a non-acidic, non-abrasive formula that won’t damage stone, grout or tile. Cuts through grease, dirt, food and soap scum on tile, grout, chrome, glass and laminates. Contains sealer to reseal as it cleans.
Suitable Tile Types
- Sealed stone
- Grout
- Ceramic
- Porcelain
- Quarry tile
Limitations
- Do not allow product to come in contact with any non-recommended surfaces
- This product should not be used to clean utensils, glassware, and dishes
- Not recommended for painted surfaces

AQUA MIX® Brilliance® Countertop Polish
Polishing cream and cleaner that adds luster and enhances the natural beauty of sealed polished stone.
Suitable Tile Types
- Sealed polished natural stone (such as granite, limestone, marble, and travertine) countertops, tabletops, and other non-traffic polished surfaces
- Effective for interior and exterior applications
Limitations
- Do not allow product to come in contact with any non-recommended surfaces
- Not recommended on floor surfaces
- High-alkaline, solvent-based, or disinfectant cleaners will remove product

AQUA MIX® KnockDown® Honing Powder
Removes scratches, moderate acid etching and wear patterns on marble, limestone and travertine.
Suitable Tile Types
Limestone, marble and travertine.
Limitations
- Do not allow product to come in contact with any non-recommended surface.
- Not intended for use as a pre-polish powder

AQUA MIX® Renue Marble Polish Cream®
Restores the shine to dull, etched or lightly scratched calcium-based natural stone.
Suitable Tile Types
Calcium-based polished natural stone (such as limestone, marble, and travertine) and cement-based precast terrazzo.
Limitations
- Do not allow product to come in contact with any non-recommended surface
- May not be suitable for some green marbles
- Severely damaged or worn polished marble may require professional resurfacing
- Not intended for use on granite, porcelain, ceramic tile or cultured marble
- For large floor surfaces, Aqua Mix® Reviver is recommended

AQUA MIX ® Reviver® Marble Polishing Compound
Restores the shine to dull, etched or lightly scratched calcium-based natural stone.
Suitable Tile Types
Polished limestone, marble, travertine and cement-based precast terrazzo.
Limitations
- Do not allow product to come in contact with any non-recommended surface
- May not be suitable for some green marbles
- Severely damaged or worn polished marble may require professional resurfacing
- Not intended for use on granite, porcelain, ceramic tile or cultured marble